Warranty; Accessories And Spare Parts . En; Troubleshooting - Kärcher CS 330 Bp Originalbetriebsanleitung

Warranty

The warranty terms published by our com-
petent sales company are applicable in
each country. We will repair potential fail-
ures of the appliance within the warranty
period free of charge, provided that such
failure is caused by faulty material or de-
fects in fabrication.
Failure
Motor does not run Battery inserted incorrectly
Motor is running,
chain is at a stand-
still
Chain brake does
not work
Saw chain and
guide bar become
hot during sawing.
Formation of
smoke.
If malfunction can not be fixed, the de-
vice must be checked by customer ser-
vice.

Troubleshooting

Cause
Battery empty
Battery overheated
Battery defective
Motor overheated
Chain brake locked
Saw chain jammed in the work-
piece
Chain jumped off the chain wheel Place the chain onto the chain
Chain brake mechanism soiled
Chain brake defective
Saw chain tension too high
No saw chain lubrication
Saw chain oil tank empty
Guide bar soiled with chips
Accessories and Spare Parts
– Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
– For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
Remedy
Insert the battery into the intake
until it locks.
Charge battery
Let the battery cool off.
Replace battery.
Allow motor to cool down
Release chain brake
Free the chain saw from the work-
piece.
wheel and tension it properly.
Clean mechanism and lock / re-
lease the chain brake several
times.
Contact customer service.
Correct the saw chain tension.
Check the saw chain lubrication,
refill saw chain oil if necessary
Clean the guide bar from soiling.
– 15
EN 35