WIKA TIF50 Betriebsanleitung Seite 25

8. Menu guidance of the user interface
8.2 Main menu "Display"
Function
Unit
Setting the unit for the display of the digital indicator
Here, you can select a unit deviating from the unit of the measuring range of the
connected transmitter. The measured values are then converted automatically
into the deviating unit.
However, only units of the same unit group as the set unit of the measuring
range may be selected.
Setting range (according to unit groups):
- Electrical measurement parameters: V, mA, Ω
- Pressure: bar, mbar, psi, hPa, kPa, mmH
- Temperature: °C, °F, K
- Others: %, USER
Unit lock
By activating the unit lock, the set display unit is locked to protect the unit against
modifications. The display shows the sign
range are converted automatically.
The unit lock only functions if the units of the measuring range and the display
originate from the same unit group.
When connecting a transmitter and its configuration via HART
another unit group, then the unit lock is deactivated. In this case, the display unit
is set according to the configured measuring range unit.
Setting range:
- not locked (UnLoC)
- locked (LoC)
Indication range format
Setting the decimal point for the indication range of the digital indicator
Setting range: 0 ↔ 0.0 ↔ 0.00 ↔ 0.000 ↔ 0.0000
Filter
Activation of the digital filter of the 1st order;
Setting range: 0 ... 10
Alarm
From this menu item it is possible to branch into the submenu 2 for the alarm
configuration by selecting SELECT.
Min/Max memory
From this menu item it is possible to branch into the submenu 2 for the min./max.
memory by selecting SELECT.
WIKA operating instructions models TIF50, TIF52
O, mH O, inHg
2 2
. Modifications of the measuring
with a unit of
®
EN
Factory
setting
mA
UnLoC
00.000
0
-----
-----
25