WIKA TIF50 Betriebsanleitung Seite 15

6. Commissioning, operation
6.2.1 Configuration via the PC
To configure the transmitter, both configuration software and a HART
WIKA offers 3 different models of HART
 HART modem with USB interface, model 010031,
®
Order no. 11025166
 HART modem with RS-232 interface, model 010001,
®
Order no. 7957522
 Bluetooth HART
®
Order no. 11364254
The HART
software (see below "Configuration software WIKA_T32").

Configuration software WIKA_T32
The use of the WIKA_T32 configuration software is recommended. This is constant-
ly updated and adapted to T32 firmware enhancements. Thus full access to all the
transmitter's functionality and parameters is always ensured.
Further configuration software
With the following software tools it is also possible to carry out configurations at the T32 e.g.:
AMS and SIMATIC PDM (T32_EDD)
■
FieldMate, PACTware, SmartVision and Fieldcare (DTM_T32)
■
DTM in FDT frame application
■
With any other HART
(e.g. measuring range or TAG no.).
Further information on the configuration of the T32 with the software tools
mentioned above is available on request.
WIKA operating instructions models TIF50, TIF52
®
modem, ATEX, CSA, FM approved, model 010041
® modem can be used together with the mentioned configuration

configuration tool the generic mode functionalities can be operated
®
modem for this.
modem are needed.
®

15
EN