Transport - Pfannenberg DTS-Serie Betriebsanleitung

ENG
4.2

Transport

Observe the following to avoid personal injury and property damage:
• Work may only be performed by qualified specialists.
• Observe the safety information.
WARNING
Risk of injury for persons!
Increased risk of injury due to improper transport.
• The unit may only be transported by persons who are familiar with the procedure and aware of the risks as well as
having the necessary qualifications.
Danger of crushing by components during transport.
Components can crush limbs and cause severe injuries during transport.
• Use suitable means of transport.
• Use anti-slip materials for securing, e.g. anti-slip matting.
• Secure loads.
• Use personal protective equipment.
WARNING
Risk of injury for persons!
Risk of injury due to tipping of the unit in case of improper transport.
• The unit may only be transported by persons who are familiar with the procedure and aware of the risks as well as
having the necessary qualifications.
• Secure the unit against tipping during transport.
ATTENTION
Damage to the unit!
Damage to the unit due to improper transport.
• Observe the information signs (if available) on the unit when transporting it.
• Only transport the unit with suitable lifting gear.
• Only transport the unit in its operating position.
NOTE
The cooling units are always transported in the packaging provided at the factory.
It consists of a covering carton, base plate, base and top padding.
Operating Manual | Attachment and Installation Cooling Units | Standard Controller (SC) – 400 / 460 V, 3~ | 086100123 26/68