Pfannenberg DTS-Serie Betriebsanleitung Seite 108

ENG
4.6.4.2 DIP-switch setting possibilities
NOTE
The cooling unit carries voltage if the red LED light on the controller is flashing. Always make sure that there is no voltage on
the unit before carrying out any work on the electrical connections.
DIP-switch
1 2
OFF OFF
ON OFF
OFF ON
ON ON
OFF OFF
ON OFF
OFF ON
ON ON
Tab. 12: DIP-switch setting possibilities
NOTE
The cooling unit must be switched off and on to accept the changed setting.
Operating Manual | Attachment and Installation Cooling Units | Standard Controller (SC) – 400 / 460 V, 3~ | 086100123
Temperatures in °C
DIP-switch 4 OFF
3 Setpoint
OFF 25 °C
OFF 30 °C
OFF 35 °C
OFF 35 °C
ON 40 °C
ON 40 °C
ON 45 °C
ON 45 °C
Max. limit Setpoint
45 °C 77 °F
45 °C 86 °F
45 °C 95 °F
50 °C 95 °F
50 °C 104 °F
55 °C 104 °F
55 °C 113 °F
60 °C 113 °F
Temperatures in °F
DIP-switch 4 ON
Max. limit
113 °F
113 °F
113 °F
122 °F
122 °F
131 °F
131 °F
140 °F
40/68