Pfannenberg DTS-Serie Betriebsanleitung Seite 113
Anbau- und einbau-kühlgeräte/standard-controller (sc) – 400 / 460 v, 3
Vorschau ausblenden
Andere Handbücher für DTS-Serie:
- Betriebsanleitung (396 Seiten) ,
- Betriebs- und montageanleitung (24 Seiten) ,
- Betriebs- und montageanleitung (24 Seiten)
Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENG
4.6.8
Adapting the unit to the mains voltage
Fig. 20: Adapting the mains voltage
1
Plug-in bridge for mains voltage adaptation
Units with a mains voltage of 400/460 V can be connected optionally to another mains voltage.
•
The adaptation is made by a plug-in bridge in the connection compartment.
Mains voltage
50 Hz
400 V
(factory setting)
—
Tab. 14: Plug-in bridge position
Prerequisite
DANGER – Danger to life due to electric shock. Make sure that the unit is voltage-free.
•
All general requirements for safe and reliable operation are fulfilled.
Procedure
1.
Pull the plug-in bridge carefully with a suitable tool (needle-nose pliers) and insert in the correct position.
–
Make sure that the pug-in bridge is inserted completely.
The mains voltage is now adapted.
Operating Manual | Attachment and Installation Cooling Units | Standard Controller (SC) – 400 / 460 V, 3~ | 086100123
60 Hz
—
460 V
2
Control fuse F2
3
Control fuse F3
Plug-in bridge position
400V
400V
L1
BR
460V
400V
460V
L1
BR
460V
G00013-01
45/68
Werbung
Inhaltsverzeichnis
