Operation - Blumfeldt Heatwave Bedienungsanleitung

OPERATION

Ignite burner
1. Open the gas cylinder valve.
2. Push in the control knob on the appliance and turn it anticlockwise to the
"IGNITION&LOW" position. The knob will make a clicking sound.
3. Check the burner for flames. If the burner does not ignite directly, turn the
control dial to the "OFF" position and try again. Wait at least 30 seconds
between ignition attempts to allow the gas to dissipate. Several attempts
may be necessary.
ATTENTION: Failure to follow the above ignition instructions may result in
flashback!
IGNITION&LOW
OFF
HIGH
EN
29