Cleaning
Warning
Danger of damage to unit.
Do not use a steam jet to clean the
unit.
•
Clean unit if possible after
each use.
•
Place the unit on hard level
ground and make sure it
cannot roll away.
Danger of injury
Wear protective gloves.
Warning
Possible danger of damage to
engine.
Do not tip the unit at an angle of
more than 30 degrees. Fuel can
flow into the combustion chamber
and cause damage to the engine.
Clean unit with a scrubbing
brush, hand brush or rag. Remove
grass debris from under the belt
guard.
Lubricating
Wheels
Lubricate wheels, axle bolts and
bearings at least once a season
with light oil or engine oil.
Pivot points
Lubricate the pivot points on the
blade handle, Bowden cable and
the cutting adjustment lever with
light oil at least once a season
Shaft
Figure 12
Lubricate the bearings and the
spring with light oil frequently
during the season.
1. Lube fitting ((optional)
Lubricate all other moving parts
with engine oil.
Information
Please contact your local service
dealer for replacement of the
cutting blade or assembly of the
trenching accessory (optional).
Maintenance of the engine
Refer to the engine manual for
appropriate instructions.
Storage
Warning
Danger of explosion and fire
If the fuel tank still contains fuel
(gasoline), never store the unit in
rooms in which the fuel vapors
could come into contact with fire
or sparks.
Warning
Risk of damage to unit
Only store the unit in an area
which is clean and dry.
Protect the unit when it is to be
stored for longer periods of time,
e.g. winter, but in all cases
against rust.
E.g. at the end of the season, or if
the unit is not to be used for
longer than a month:
•
Clean the unit.
•
Wipe over all metal surfaces
with an oil-impregnated cloth
(non-resinous oil) or spray a
fine coat of oil onto them, to
protect them from corrosion.
•
Follow the instructions in the
engine manual for storing the
engine.
5
Warranty
The warrantee conditions that
apply in each country are
published by either our company
or the importer of our products.
Faults will be repaired free of
charge within the framework of
the guarantee, provided that they
have been caused by a material
defect or manufacturing error. In
the event of a guarantee claim,
please contact your dealer or our
nearest branch office.
Information on engine
The engine manufacturer is
responsible for all engine-related
issues with regards to
performance, powerrating,
specifications, warranty and
service. Please refer to the engine
manufacturer's
Owner's/Operator's Manual
packed separately with your unit
for more information.
English