Product Layout - Athena GET LC-GPA Bedienungsanleitung

ENGLISH
A. WARNINGS FOR CORRECT USE
Read all the instructions and warnings carefully before using LC-GPA.
Failure to read and/or observe the instructions and warnings can lead to incorrect use
of the device or its malfunction, resulting in product damage and personal injuries.
LC-GPA IS INTENDED ONLY AND EXCLUSIVELY FOR RACING USE.
GENERAL WARNINGS
1. Follow the instructions described in this manual to prevent vehicle damages.
2. Do not modify or replace the material supplied by GET.
3. Always make sure that no installed part can interfere with the hot parts of the
engine, the steering components or with the rider.
4. The product is not a toy. Keep it out of the reach of children and/or animals as it
contains small sized components that could be swallowed
5. Do not use the product for purposes other than those specified in these instructions.
6. Do not use high pressure washers on the product.
SPECIFIC WARNINGS
1. LC-GPA works only with GET RX1, ECULMB and SX1 ECUs. It is not compatible
with the OEM or any other different ECU.
2. Always make sure that LC-GPA is properly installed and functional prior to use.
3. Never expose the device to temperatures above 70°C /158°F.
4. Install it when the engine is cold.
EN
2
B. PRODUCT LAYOUT
5 6
4 7
3 8
2 9
LC
1 10
MFL
MAIN Connector Mode Button
(LC-GPA to GET ECU) Connector
Blue LEDs
LC LED
Multi Functional Light (MFL)
SUPPORT BRACKET ZIP TIES
EXTENSION LOOM MODE BUTTON
(Included only on (Included only on
specific applications) specific applications)
3
EN