Product Layout - Athena GET WIFI-COM HONDA Handbuch

ENGLISH
ATTENTION: GET WIFI-COM HONDA WORKS ONLY
WITH HONDA OEM ECUs
A. WARNINGS FOR CORRECT USE
Read all the instructions and warnings carefully before using
the WiFi-COM.
Failure to read and/or observe the instructions and warnings
can lead to incorrect use of the device or its malfunction,
resulting in product damage and personal injuries.
1. Do not modify or replace the material supplied by GET.
2. Always make sure that no installed part can interfere with
the hot parts of the engine, the steering components or with
the rider.
3. The product is not a toy. Keep it out of the reach of children
and/or animals as it contains small sized components that
could be swallowed.
4. Do not use the product for purposes other than those
specified in these instructions.
5. Always make sure that WiFi-COM is properly installed and
functional prior to use.
6. Never expose the device to temperatures above 70°C/158°F.
7. Avoid direct jets of high-pressure water.
8. Install it when the engine is cold.
EN 2
B. PRODUCT LAYOUT
MAIN WIFI-COM HONDA FEATURES:
• Programmable through app:
This WiFi-COM is a tuning tool developed in close partnership
with Honda for CRF machines. It allows to work on both CRF
250 and 450's stock ECUs by using your smartphone and/
or tablet. It is possible to safely modify fuel and ignition
parameters of the CRF factory maps, to adjust the overall
maps, and to modify specific break points.
• Plug & Play:
This high-tech device comes with Plug & Play connectors to be
plugged straight into the standard diagnostic/fuel pump connection.
• Diagnostics:
With the WiFi-COM it is possible to check the correct operation
of the sensors connected to the control unit and manage the
engine data in real time.
External case
Female
connection
wiring with
male pins
Male
connection
wiring with
female pins
WIFI signal
LED
Power supply
LED
3 EN