Tektronix 5-Serie Schnellstart-Benutzerhandbuch Seite 39

Task
Change horizontal or vertical
settings directly on a waveform.
Vertical changes only apply
to the selected channel or
waveform; horizontal changes
apply to all channels and
waveforms.
Increase or decrease the zoom
area (while in Zoom mode)
Quickly scroll or pan a waveform
or list.
Close or open the Results Bar
to increase the Waveform View
area.
Change the position of badges
in the Settings Bar or Results
Bar.
5 Series B Mixed Signal Oscilloscopes MSO54B, MSO56B, MSO58B Quick Start Manual
Touchscreen UI action
Tap a badge and use the Scale buttons.
Touch and hold two fingertips on the waveform
view, move them together or apart vertically or
horizontally, lift from screen; repeat.
Touch and hold two fingertips on the waveform
view, move them together or apart vertically or
horizontally, lift from screen; repeat.
Touch and drag in the waveform or list.
Tap on the Results Bar Handle (three vertical dots
in border) or anywhere in the border between the
Waveform View and the Results Bar.
Touch and drag the badge to a new position in the
same bar.
Getting acquainted with your instrument
Mouse action
Left-click a channel, waveform, or Horizontal
badge and click on the Scale buttons.
Click the + or - buttons on the Zoom Title bar.
Click the Draw-a-Box button, draw a box around
the waveform area of interest.
Click and drag in the waveform or list.
Click the Results Bar Handle (three vertical dots
in border) or anywhere in the border between the
Waveform View and the Results Bar.
Click and drag the Results Bar divider.
Click and drag the badge to a new position in the
same bar.
39