Vermeiren Inovys II Gebrauchsanweisung Seite 12

EN
NL
9. Position the seatbelt buckle so that the release button will not be contacted by wheelchair
components during a crash.
10. Make sure that the shoulder-belt restraints fit over the shoulders, see figure 4.
Belt restraints must not be held away
from the
components
wheels.
Figure 3
2.4.4 Assembly
CAUTION
• Make sure that your fingers, clothes, buckles won't get trapped during assembly.
• Always keep the swing range of the footrest in mind to prevent bystanders from being injured
or objects from being damaged.
• Before use, always make sure that all assembled parts have been firmly secured.
Figure 5
body by wheelchair
such as armrests
Improper belt-restraint fit
Risk of injuries or damage
Inovys II base frame with 16" and 24" wheels - disassembled parts
Belt restraints make full contact with
shoulder, chest and pelvis.
Pelvic belt low on the pelvis near the
or
thigh-abdominal junction
Figure 4
16"
8
Inovys II, Inovys II kids
Before use
✓
Proper belt-restraint fit
24"
2021-11