Mounting The Flue - hanseatic SY-3388A2-P1-C81-L22-600 Gebrauchsanleitung

Page EN-18 Assembly
(14)
9. Push the locking mechanism (13) of the
grease filter (14) to the left and careful-
ly remove the grease filter by pulling it
downwards.
10. Mark the two drill holes.
11. Remove the exhaust hood (1) again.
12. Drill holes into the marked spots with a
diameter that corresponds to the wall
plugs.
13. Insert two screw wall plugs into the dril-
led holes.
14. Hang the exhaust hood on the wall
mount again and screw it into the wall
with two screws.

Mounting the flue

NOTICE
■ Make sure that there is at least 5 cm
of space between the ceiling and the
wall mount for the mains cord.
(13)
(6)
1. Hold the exhaust hood (6) up to the wall
horizontally at the desired height for the
flue and with the middle of the exhaust
hood flush to the vertical guideline.
2. Mark the two drill holes.
3. Drill holes into the marked spots with a
diameter that corresponds to the wall
plugs.
4. Hammer two wall plugs into the drilled
holes.
5. Attach the wall mount (6) to the wall with
two screws.
guideline