Setting Mode - Raddy WF-60C Benutzerhandbuch

value. Then short press the【SET】button to save.
*The RCC (DCF) signal is transmitted from Germany. Germany is in UTC-1
Zone, countries that are in the same time zone as Germany (for example,
France, Italy, Spain, Denmark, Netherlands), the time zone selection is 0.
Countries not in UTC-1 time zone need to add or subtract the time zones,
for example, Portugal with UTC-0 time zone, the time zone selection is -1.
2. Manual Receiving:
①
Press and hold the【+/RCC】button to enter the Manual RCC Signal
Receiving Mode. The RCC icon will flash and the unit will search for the
RCC signal. (It won't search for signal automatically every day.)
②
Once the signal is received, the LCD will update and display the
received time/month/date/weekday. And the unit will display DST on the
LCD. If no DST signal is received, DST icon will not display.
③
During the signal searching, press and hold the【+/RCC】button again
can exit the Manual RCC Signal Receiving Mode.
Note: While the main unit is searching for RCC signal, it won't respond to
any button command. If you need to use other functions with the buttons,
please exit the Manual RCC Signal Receiving Mode first.
3. RCC Icon Display:
①
When searching for signal, RCC icon will be flashing.
②
When signal is successfully received, LCD will display the complete
RCC icon and exit RCC receiving.
③
If no signal is received, the RCC icon will disappear.

SETTING MODE

1.
Press and hold the【SET】button to enter the Setting Mode. Once in
Setting Mode, the item you are currently setting will flash on the screen.
2.
Press【+/RCC】and【-】buttons to select for the currently flashing
item. Press and hold the【+/RCC】and【-】buttons will quickly
change the number value by 8 steps.
WF-60C WEATHER STATION
09