Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
All manuals and user guides at all-guides.com
16. Connect the Temperature Sensor / Charging
When charging NiCd- or NiMH-batteries you can use
a temperature sensor. Connect the original CS-sensor
with the socket at the left side of the charger and stick
the sensor to the battery. Please note, that you first
have to set the cut-off temperature.
The setting is been done in the setup of the Battery
memory set. You can set the temperature from 20°C
to 80°C. If the temperature of the battery is over the
set limit, the charging process will be terminated.
Please refer to the manufacturer's indication.
17. Optional Parts
C140201 Balancer EHR-Adapter 2-6S
C140202 Charger-Temperatur Sensor
26
TEMPERATURE
CUT-OFF
C140205 Lipo-charging cable with EH
Balancer-connector
C140206 Lipo-charging cable with XH
Balancer-connector
50C
DEC. INC.
Werbung
Kapitel
Inhaltsverzeichnis
