Installations According To Ul/Csa Standards - Videotec MAXIMUS MPX 2 Serie Bedienungsanleitung

6.8 Installations according to UL/
CSA standards
Pay attention not to damage the
conductors and the boards.
For installations according to UL/CSA standards, the
cables for Ethernet, reset, alarms, relays and fibre
optics should be inserted in the right cables entry
(01) as indicated in the following figure (Fig. 17, page
32).
For installations according to UL/CSA standards, pass
the power supply cable through the cables input on
the left (02), as indicated in the figure (Fig. 17, page
32).
02
Fig. 17
In installations according to UL/CSA standards,
installation is compulsory of the separation barrier
provided.
Having inserted all the connectors and before
powering the device, install the separation barrier
supplied.
Fasten the barrier (01) using the specific screws and
washers (02) to the prepared spacers (03) (Fig. 18,
page 32 and Fig. 19, page 32).
32
Fig. 18
01
Fig. 19
03
01
02
MNVCMPXHDC_2100_EN