Replacing The Battery For Date (One Touch Zoom 90S Qd Only) - Nikon One Touch Zoom 90s Bedienungsanleitung

Replacing the battery for date
(One Touch Zoom 90s QD only)
If the date/time printed on film is dark or difficult to read,
the battery for date must be exhausted. Replace it with a
new one.
Battery type
Use one CR2025 type 3 V lithium battery for date with this
camera.
1.
Make sure that no film is inside, and
open the camera back.
You can check whether or not there is film inside by looking
through the film cartridge confirmation window (
2.
Open the date battery chamber lid
inside the camera back.
Remove the date battery chamber lid by pressing the portion
indicated by the arrow in the illustration, using a screwdriver
or equivalent.
34
Additional Information
p. 9).