Nikon One Touch Zoom 90s Bedienungsanleitung Seite 37

Problem
The subject
appears out
of focus in
the print.
The numeral
" " does not
appear even
when film is
loaded.
The date/
time are not
printed on
pictures.
A characteristic of electronic cameras
In rare cases, when strong static electricity or the like is
applied to the camera, the camera may not work properly.
If this happens, remove the battery and reinstall it.
Check points and solution
a Camera shake.
→ Gently press the Shutter Release button,
or use a tripod or place the camera on a
stable flat surface.
a Something in front or in back of the
subject is in focus.
→ Be sure to center the autofocus spot
mark on the subject before releasing the
shutter. When correct focus cannot be
easily achieved, use the focus lock.
a " " blinks on the LCD panel.
→ Remove the film and load it again.
a The battery for date is exhausted.
→Replace it with a new one.
a The date panel displays "
→Set the panel so that it displays the
indication to be printed.
Additional Information
Ref. page
16, 23,
25, 27,
31
18, 20,
21
13, 14
E
34, 35
."
32
37