Nikon One Touch Zoom 90s Bedienungsanleitung Seite 14

Loading the film (continued)
3.
Pull the film leader out to the red index
mark.
Hold the film cartridge and ensure film is properly
positioned with no slack.
4.
Close the camera back, and check that
the film has been correctly loaded.
Once the camera back is closed, the film automatically
advances to the first frame. Until film loading is complete,
" " blinks on the LCD panel.
When the film has been properly set, " " is displayed on the
LCD panel.
If the letter " " blinks on the LCD panel, film is not properly
loaded. Open the camera back again and reload film.
14
Preparations