Replacing The Battery For Date (Lite Touch Zoom 70W Qd Only) - Nikon Lite Touch Zoom 70W Bedienungsanleitung

Replacing the battery for date
(Lite Touch Zoom 70W QD only)
If the date/time printed on film is dark or difficult to read,
the battery for date must be exhausted. Replace it with a
new one.
Battery type
Use one CR2025 3V lithium battery for date with this camera.
1.
Check that no film is inside, and open
the camera back.
You can check whether or not there is film inside by looking
through the film cartridge confirmation window (
2.
Open the date battery chamber lid
inside the camera back.
Remove the date battery chamber lid by loosening the screws
indicated by the arrow in the illustration, using a screwdriver.
32
Additional Information
p. 5).