Getting Started; Installing The Battery; Checking Battery Power - Nikon Nuvis S 2000 Bedienungsanleitung

Getting started

1
Open the slide cover until it
click-stops.
When closing the slide cover, do
not close it too quickly, as this
may damage the lens.
•When the camera is not used for
approx. 2 minutes, the camera turns off
automatically. (- P. 17)

Installing the battery

2
Install the battery.
Open the battery chamber lid.
Install one 3V lithium battery
CR2 inside the battery chamber
as shown.
Close the battery chamber lid
until it clicks shut.
•Remember to reset the date and time
when the battery is replaced.
(- PP. 30-31)

Checking battery power

Check battery power.
Open the slide cover to turn the
camera on.
•The lens automatically extends out to
the W (wideangle) position and the
flash pops up.
•If a low battery power indicator "
does not appear, battery power is full.
•If " " blinks or nothing appears on
the LCD panel, the battery is exhausted
and needs to be replaced.
E
"
9