Turning The Camera On; Checking The Battery Power - Nikon One Touch Zoom 90s Bedienungsanleitung

Turning the camera on

Press the Power button.
Once you press the Power button, the camera is turned on,
and the lens protrudes. When you press the Power button
again, the camera is turned off and the lens retracts.
Auto Power-Off function
The camera is automatically turned off if it is not operated for
more than 3 minutes. When the camera is turned off, the lens
cover closes, and all shooting modes are reset (except for
Red-eye Reduction mode).

Checking the battery power

Make sure that the Low Battery Power
indicator ( ) is not appeared on the LCD
panel.
If " " is not appeared, battery power is sufficient.
If " " is blinking, or no indicators on the LCD panel appear, the
battery is exhausted. Replace it with a new one.
Always check the battery condition before shooting.
It is recommended to carry spare batteries with you.
The batteries may be difficult to obtain in some areas.
12
Preparations