Operating The Shutter Release Button - Nikon One Touch Zoom 90s Bedienungsanleitung

Operating the Shutter Release button

1.
Lightly press the button halfway and
confirm the green LED lights up.
When you press the button lightly, the focus and exposure are
achieved, and the green LED lights up.
The focus is locked (Focus lock
Release button is depressed lightly.
2.
Fully depress the Shutter Release button
to take the picture.
Pressing the Shutter Release button abruptly in one stroke
may result in camera shake. Be sure to slowly press the
Shutter Release button.
While the green LED is blinking with the Shutter Release
button pressed lightly, the flash is being charged, and the
shutter cannot be released. Lightly press the Shutter Release
button again, if the green LED is not blinking and remains lit
release the shutter.
If the subject is closer than approx. 0.7m (2.3 ft.) in the
telephoto setting, the green LED does not light even when you
press the Shutter Release button halfway, and the shutter
cannot be released. Move away from the subject until the
green LED lights up. Note that the Shutter Release button may
still work even if the camera-to-subject distance is extremely
short, i.e., out of the control range of the camera.
16
Basic Operations
p. 20) while the Shutter