To Automatically Fire The Flash - Nikon One Touch Zoom 90s Bedienungsanleitung

To automatically fire the flash

The flash automatically fires when the subject is dark.
1.
Press the Power button.
When you press the Power button, the "
on the LCD panel and Auto Flash mode is automatically
selected.
2. Make sure that the green LED lights up,
then release the shutter.
When the green LED is blinking with the Shutter Release button
pressed lightly, the flash is being charged, and the shutter cannot
be released. Take your finger off the Shutter Release button once
and lightly press it again. If the green LED is steadily lit release
the shutter.
If the subject is sufficiently illuminated, the flash does not fire.
24
Advanced Operations
Auto Flash mode
Example
" mark appears