To Automatically Fire The Flash - Nikon Lite Touch Zoom 100ED Bedienungsanleitung

To automatically fire the flash

The flash automatically fires when there is not enough light or the
subject is backlit.
1. Open the slide cover.
Lite Touch Zoom 100ED
When you open the slide cover, the power is turned on and the built-in
flash pops up. The "
Flash mode is automatically selected.
Automatic flash firing for a backlit scene
When the subject is backlit, the flash is automatically fired while
simultaneously compensating exposure for the main subject and
the background.
2.
Check that the orange and green LEDs light up,
then shoot.
If there is enough light, "
flash does not fire.
While the orange LED is blinking with the Shutter Release button
pressed lightly, the flash is being charged, and the shutter cannot be
released. Lightly press the Shutter Release button again, and release
the shutter after the orange LED stops blinking and stays lit.
Pressing down on the popped-up flash unit will prevent the flash from
firing. Do NOT touch the flash unit.
32
Advanced Operations
Auto Flash mode
" mark appears on the LCD panel and Auto
" appears on the LCD panel, and the
Lite Touch Zoom 100ED QD
Example