To automatically fire the flash
The flash automatically fires when the subject is dark.
1.
Press the Power button.
When you press the Power button, the "
on the LCD panel and Auto Flash mode is automatically
selected.
2.
Check that the green LED lights up, then
shoot.
When the green LED is blinking with the Shutter Release button
pressed lightly, the flash is being charged, and the shutter cannot
be released. Lightly press the Shutter Release button again, and
release the shutter after the green LED steadily lights up.
If the subject is sufficiently illuminated, the flash does not fire.
20
Advanced Operations
Auto Flash mode
Example
" mark appears