Programming In The Operating Matrix - Endress+Hauser RIA14 Bedienungsanleitung

RIA14

5.2.2 Programming in the operating matrix

Fig. 11: Programming the field indicator
w
Enter the operating matrix
x
Menu (select with "+" or "-" key)
y
Select the operating functions
z
Enter parameters in the edit mode (enter/select data with "+" or "-" and accept with "E").
{
Go directly to the Home position.
–Beforehand, you are asked whether the data entered up to now should be saved.
|
Exit the menus with "+/-". You are asked whether the data entered should be saved.
}
Prompt to save data (select YES/NO with "+" or "-" key and confirm with "E").
The operating matrix can be found in Section 5.3.
Endress+Hauser
Operating the field indicator
a0011262-en
35