Herunterladen Inhalt Inhalt Diese Seite drucken

Certificates And Approvals; Installation; Incoming Acceptance, Transport, Storage; Transportation And Storage - Endress+Hauser RIA14 Bedienungsanleitung

Feldanzeiger
Vorschau ausblenden Andere Handbücher für RIA14:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

RIA14
2.3

Certificates and approvals

CE mark, declaration of conformity
The field indicator is designed to meet state-of-the-art safety requirements, has been tested and
left the factory in a condition in which it is safe to operate.
The device meets the relevant standards and directives as per EN 61 010 "Safety requirements
for electrical equipment for measurement, control and laboratory use".
The device described in these Operating Instructions thus meets the legal requirements of the
EU directives. The manufacturer confirms that the device has been tested successfully by affixing
the CE mark.
3

Installation

3.1

Incoming acceptance, transport, storage

The permitted ambient and storage conditions must be observed. The precise specifications can
be found in Section "Technical data".
3.1.1 Incoming acceptance
On receipt of the goods, check the following points:
• Are the packaging or contents damaged?
• Is anything missing from the delivery? Compare the scope of delivery with the information
you specified in the order. See also section 2.2 "Scope of delivery".

3.1.2 Transportation and storage

Note the following points:
• Pack the device so that is protected against impact for storage and transportation. The original
packaging provides optimum protection.
• The permitted storage temperature range is -40 to +80°C (-40 to +176 °F); it is possible to
store the device in the limit temperature ranges for a limited period (maximum 48 hours).
3.2

Installation conditions

The process indicator is designed to be used in the field.
The orientation is determined by the readability of the display. Cable entries are located on the
bottom of the device.
Operational temperature range:
-40 to +80 °C (-40 to +176 °F)
"
Caution!
If the device is operated in the upper temperature limit range, this reduces the operating life of
the indicator.
Endress+Hauser
Installation
25

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis