Display Symbols; Configuration Via Operating Keys - Endress+Hauser RIA14 Bedienungsanleitung

RIA14

5.1.2 Display symbols

1 Bargraph display
1a Indicator for measuring range undershoot
1b Indicator for measuring range overshoot
2 Measured value display
Digit height 20.5 mm (0.8 in)
3 14-segment display for units and messages)
4 Symbol 'Programming disabled'
5 Unit '%'
6 'Fault' indicator
5.2

Configuration via operating keys

#
Warning!
The device must be configured outside the hazardous area.
Fig. 10: Operating keys of field indicator ("-", "+", "E")
To configure the device, first remove the housing cover. Then remove the display from the
electronics unit. The keys (+, -, E) can now be accessed.
During configuration, the display must be connected to the electronics unit. Afterwards, the
display can be positioned at the desired angle.
5.2.1 Navigation
The operating fields are split into 2 levels.
Menu: Various menu items can be selected on the menu level. The individual menu items are
an aggregation of the associated operating functions.
Operating function: An operating function can be regarded as an aggregation of the operating
parameters. The operating functions are used to operate and configure the device.
Endress+Hauser
Operating the field indicator
a0011261
33