Teka IZS 34700 Montageanleitung Und Empfehlungen Zur Verwendung Und Wartung Seite 37

Fig. 13
base (preferably "sandwich" type) as
shown in figure 8.
Fig. 8
To ensure the correct operation of
these functions, it is important that the
pan and the cooking zone are not hot
at the start of the process.
Further information about suitable
pans (saucepans, frying pans, grills,
etc.) is given on the Teka web page.
These functions require
that the bottom of the vessel used
covers the two ( ) of the cooking
zone; (see fig.9).
Fig.9
The Touch Control has special
features that help the user to cook
through the CHEF sensor
To activate a special feature on a zone:
1 First it should be selected; and then,
the decimal point (4) will be active
on the power indicator (3).
2 Now click on the CHEF sensor
(16). The sequentially successive
presses will go over all the Cooking
functions available in each zone
one by one. These functions
will show the activation with the
corresponding leds (17), (18), (19),
(20) ,(21) ,(22), (23), (24), (25) and
(26).
Fig. 14
If you want to cancel a special active
function at any time, you should touch
the "slider" cursor sensor (2) of the
related zone to select it. The decimal
point (4) of the power indicator (3) will
light up. Then, touch again the "slider"
(2) cursor in the position ''0'' .
KEEP WARM FUNCTION
This function sets an automatic
power control suitable for keeping the
cooked food hot.
(16).
To activate it, select the plate, and
press on the CHEF sensor
until the led (17) located on the icon
lights up. Once the function is
activated, the symbol
on the power indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
MELTING FUNCTION
This function sets an automatic power
control suitable for maintaining a low
temperature in the cooking zone.
Ideal for defrosting food or for slowly
melting other food types as chocolate,
butter, etc.
To activate it, select the plate, and
press on the CHEF sensor
until the led (18) located on the icon
lights up. Once the function is
activated, the symbol
on the power indicator (3).
You can override the function at
any time by turning off the plate,
by changing the power level or by
choosing a different special function.
(16)
SIMMERING FUNCTION
will appear
This function sets an automatic power
control suitable for keeping simmering.
After the food is boiled, enable the
plate by selecting it, and press the
CHEF sensor
(19) located on the icon
up. Once the function is activated, the
symbol
indicator (3).
You can override the function at
any time by turning off the plate,
EN
(16)
will appear
(16) until the led
lights
will appear on the power
37