Additional Safety Instructions; Observe The Safety Information And Notes On; Residual Risk - Parkside PLSA 40-Li C2 Originalbetriebsanleitung

GB IE
use low-performance machines
for heavy work. Do not use the
device for purposes for which it
is not intended.
• If you stop the machine for main-
tenance, inspection, storage or
to change accessories, switch
off the power source, discon-
nect the machine from the mains
supply or remove the batteries,
and ensure that all moving parts
have come to a standstill. Al-
low the machine to cool down
before inspection, changing set-
tings etc. Maintain the machine
with care and keep it clean.
• Always allow the machine to
cool down before storage.
• Be aware that the shredding ma-
chine can always still move even
if the power source is switched
off by the locking function of the
protective equipment. Be aware
of this when maintaining the
shredding machine.
• Never try to circumvent the lock-
ing function of the protective
equipment.

Additional safety instructions:

• After they have been joined to-
gether, the blowpipes cannot be
taken apart again!
• Remove the batteries before
installing or removing the collec-
tion bag.
• Do not use any accessories
that are not recommended by
PARKSIDE. This can result in
electric shock or fire.
Observe the safety in-
formation and notes on
32
charging and proper
use as shown in the
instruction manual for
your battery and charg-
er from the Parkside
X 20 V Team series. A
detailed description of
the charging process
and further information
can be found in the sep-
arate operating instruc-
tions.
Recommendation:
• Avoid operating the machine in
poor weather conditions, espe-
cially when there is a lightning
hazard.

RESIDUAL RISK

Even if properly operating and han-
dling this electric tool, some residual
risks will remain. Due to its construc-
tion and build, this electric tool may
present the following hazards:
a) Ear damage if working without
ear protection.
b) Damage to your health caused
by swinging your hands and
arms when operating the appli-
ance for longer periods of time
or if the unit is not held or main-
tained properly.
c) Lung damage, if suitable respira-
tory protection is not worn.
d) Eye injuries if no suitable eye
protection is worn.
Warning! During operation,
this electric tool generates an
electromagnetic field which,
under certain circumstances,