Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SLB - SIMOLINK Board
3
Installation
If the inverters/converters are ordered with optional functions, the optional
boards are already installed in the units when they are delivered.
It is possible to retrofit optional boards and this can be carried out by the user.
For this purpose, there are either three or up to six slots on the basic unit
depending on the type of construction for mounting the optional boards.
An exact description of installation is included with the relevant basic unit. As
the unit has to be removed and opened in order to install optional boards,
attention must be paid to the ESD measures. Please refer to the operating
instructions of the basic unit in this regard.
NOTE
Siemens AG 6SE7087-6NX84-0FJ0
SIMOVERT MASTERDRIVES
All manuals and user guides at all-guides.com
08.2000
Generally, you can install the SLB (SIMOLINK) optional board in any slot, but
you must take into account that a sensor board always requires slot C.
Operating Instructions
Installation
3-1
Werbung
Kapitel
