Waldorf MicroWave II Bedienungsanleitung Seite 120

------------------------------------------------------
******************************************************
2.83 INFD
******************************************************
INFD 18h Information Dump
The full format of a INFD Dump is:
Index Label Value
------------------------------------------------------
0 EXC F0h
1 IDW 3Eh
2 IDE 0Eh
3 DEV
4 IDM 18h
5 Typ xx
6... ii...
6+N EOX F7h
------------------------------------------------------
******************************************************
Information types
xx Information
------------------------------------------------------
00: Sampling rate
01: Routing
02: MIDI Switches
03: Ext In Select
Output assignments:
out1 (ESSI0 TX0) (digital out 1)
Bit 3 Bit 2
In1 In2 / 9407
(ESSI0 Rx) (ESSI1 RX)
out2 (ESSI1 TX0) (digital out 2)
Bit 3 Bit 2
In1 In2
(ESSI0 Rx) (ESSI1 RX)
out3 (ESSI1 TX1)(Dream Input)
Bit 3 Bit 2
In1 In2
(ESSI0 Rx) (ESSI1 RX)
So a complete routing dump is
F0,3E,0E,DEV,18,1,out1,out2,out3,F7
Default routing:
out1 = 0Fh
out2 = 0Fh
out3 = 0Fh
That is all signals to all outputs.
MIDI Switches:
0: off , else on
So a complete MIDi Switch dump is
F0,3E,0E,DEV,18,2,MM,F7
Default switching:
MM = 7, That is all in-/outputs on MIDI IIC in is
currently ignored to ensure all others can be turned
on again.
120
Description
Marks Start of SysEx
Waldorf Electronics
GmbH ID
Microwave 2 ID
Device ID
here INFD
Typ of Information
give
Information specific
End of SysEx
N ii
1 0: 32000 1:40000
2:44100 3:48000
3 out1,out2,out3
:triple output
assignments
bitvectors
1 bit 0: Serial MIDI
in on/off 1: IIC
MIDI in 2: IIC MIDI
out
1 0: Digital input 1
1:Digital input2
(Dream 9407)
Bit 1 Bit 0
MW Main MW Sub
Bit 1 Bit 0
MW Main MW Sub
Bit 1 Bit 0
MW Main MW Sub
Bedienhandbuch MicroWave II • MicroWave XT • XTk