Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Measuring Procedure
4.1. DC V (DC Voltage Measurements)
Note:
Always start with the highest measuring range.
1.)
Select with the rotary switch the corresponding measuring
range (0,1V ~500V DCV).
Insert the black test lead into the "COM" socket and the
2.)
red test lead into the "V" socket.
3.)
Connect the test leads in parallel to the circuit/component
to be measured.
4.)
Read the measured value from the analogue display.
-15-
Werbung
Inhaltsverzeichnis
