Maintenance And Service; Filter Change - MR MESSKO MPreC Betriebsanleitung

5

Maintenance and service

5 Maintenance and service
The mobile MESSKO MPreC test bench is maintenance-free .
It is recommended that the pressure transmitter is replaced or calibrated every 3 years .
5.1

Filter change

Description
1 Replace the main and/or prefilter
depending on the level of contami-
nation .
Main filter
Prefilter
2 Press the prefilter's latch down-
wards .
3 Hold the latch in position and turn
the filter cartridge to the left.
BA 3451814/00 DE-EN
CAUTION
It is essential to disconnect the pressure air supply before
replacing the filter.
Image
NOTE
The level of contamination depends on
the usage cycles and the quality of the
compressed air used .
25