MR MESSKO MPreC Betriebsanleitung Seite 23

4 Operation
Description
10 Start the MPreC software via the program
icon .
11 Select the language of the user interface
(English or Chinese) . Relaunch the
software to change the language .
12 Via „Settings" you can specify the format
(„PDF" and/or „Picture") of the test
protocol .
In the command line underneath you can
specify the storage path .
13 Enter the serial number of the pressure
relief valve under "Serial no." (mandatory
field).
Additional text can be entered under
"Additional text" .
Select the pressure range of the pressure
relief valve to be tested .
Select the number of test cycles
(1, 5 or 10) .
14 Start the test
After clicking the program button „Start
test" the test starts automatically and
leads to loud noises when the pressure
relief valve is released for pressure
compensation .
BA 3451814/00 DE-EN
NOTE
Image
If „Export (autom.): enabled" is selected, then
the output file is automatically stored under the
specified path as soon as the automatic test
sequence is completed .
23