MR TAPCON 230 Montageanleitung Seite 44

®
44 TAPCON 230
Characteristics
Rated switching capacity
Table 5: Permissible fuse types
1. Voltage measurement: Feed the wires into the terminals UI:X7-4 (N con-
ductor) and UI:X7-3 (L conductor) and fasten them using a screwdriver.
Figure 31: UI:X7-4/3
2. Current measurement: Feed the wires into the terminals UI:X7-2 (l) and
UI:X7-1 (k) and fasten them using a screwdriver.
Figure 32: UI:X7-2/1
7820658/02 EN
Miniature circuit breaker
B, C, K or Z
50 kA
For installation in accordance with IEC 61010-2-30
CAT II: 10 kA
Maschinenfabrik Reinhausen GmbH 2021
6 Mounting
Safety fuse
Fast-acting, medium-act-
ing or delayed-acting