Appendix; Technical Specifications; Troubleshooting - Silvercrest SKGET 2000 A1 Bedienungsanleitung

Appendix

Technical specifications
Power supply
Power consumption

Troubleshooting

PROBLEM
The appliance is not
working.
The error code "
appears on the display
and you hear beeps.
The error code "
appears on the display
and you hear beeps.
The error code "
appears on the display
and you hear beeps.
The error code "
appears on the display
and you hear beeps.
The appliance switches to
standby mode and "OFF"
appears on the display.
If the malfunction cannot be corrected using any of the suggestions above, or if you have
found some other kind of malfunction, please contact our Customer Service department.
SKGET 2000 A1
220–240 V ~ (AC) 50/60 Hz
2000 W
All of the parts of this appliance that come into
contact with food are food-safe.
POSSIBLE CAUSE
The appliance is not connected
to a mains power socket.
The appliance is damaged.
The On/Off button
has not been activated.
"
There has been a short circuit;
the appliance is damaged.
"
The overheating protection has
been triggered.
"
The grill thermometer r is not
correctly connected.
"
The grill thermometer r has
measured a core temperature
of over 180°C.
POSSIBLE SOLUTION
Connect the appliance
to a mains power socket.
Contact the Customer
Service department.
6
Press the On/Off button
6.
Disconnect the plug from
the mains power socket and
contact the Customer Service
department.
Disconnect the plug from
the mains power socket
and wait until the appliance
has cooled down. If the
appliance still does not
function after cooling down,
contact the Customer Service
department.
Press the thermometer button
D again or connect the grill
thermometer r to exit error
mode.
Remove the grill thermometer
r from the food you are
grilling or from the heat
source and switch the appli-
ance on again if you want to
continue using it.
GB │ MT │ 127 ■