HBM P8AP Bedienungsanleitung Seite 6

Safety Instructions
4
exceeded. The following are set out in the technical
data sheets and must not be exceeded:
- Limit loads
- Permissible dynamic loads
- Temperature limits
S The transducer is maintenance-free.
S A functional measuring chain is only created when the
(passive) transducer is connected to an amplifier. En-
sure that electromagnetic compatibility or integration
in a suitable EMC shielding design is provided. To do
this:
- Connect the cable shield extensively to the input of
the amplifier.
- Connect the measuring body, i.e. the housing, to
the ground.
Important
The transducer cable shield is not connected with the
housing (ground).
Qualified personnel
Qualified persons means persons entrusted with the in-
stallation, fitting, commissioning and operation of the
product who possess the appropriate qualifications for
their function.
This includes people who meet at least one of the three
following requirements:
S Knowledge of the safety concepts of measurement
and automation technology is a requirement and as
A2079-4.0 P8AP