Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting; Disposal - Parkside PAFS 550 A1 Originalbetriebsanleitung

Airless-farbsprühsystem
Vorschau ausblenden Andere Handbücher für PAFS 550 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 23

Troubleshooting

Fault
Possible cause
The inserted
nozzle is
The paint
clogged .
spray gun
The HEA filter is
does not
clogged .
spray .
The paint spray
gun is locked .
The appliance is
not plugged in .
The appliance
has overheated .
The motor
There is no volt-
is not
age on the
running .
mains socket .
The appliance
has been operat-
ed and main-
tained according
to the operating
instructions, but
still does not
work .
PAFS 550 A1
Remedy
Clean the nozzle
and use a suitable
HEA filter .
Clean or replace
the HEA filter .
Unlock the paint
spray gun .
Insert the mains
plug into an ap-
propriate mains
socket .
Follow the instruc-
tions in the section
"Overheating
protection" .
Check the mains
socket .
Contact our
Customer Service
department .

Disposal

The packaging is made from environ-
mentally friendly material and can be
disposed of at your local recycling
plant .
Do not dispose of power tools
in the normal domestic waste!
According to the European Directive
2012/19/EU, used power tools must
be collected separately and recycled in an environ-
mentally sound manner .
Dispose of the packaging in an envi-
ronmentally friendly manner . Note the
labelling on the packaging and sepa-
rate the packaging material compo-
nents for disposal, if necessary . The packaging
materials are labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics, 20–22: paper and cardboard,
80–98: composites .
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out product .
The product is recyclable, subject to
extended producer responsibility and
is collected separately .
Environmental compatibility and material
disposal
Paints and lacquers ... are considered hazard-
ous waste and must be disposed of accordingly .
Observe the local regulations .
Observe the manufacturer's instructions .
Environmentally harmful chemicals must not be
allowed to get into the ground, groundwater
or any body of water .
Spraying work next to bodies of water or ad-
joining surfaces thereof (catchment area) is
therefore not permitted .
When purchasing paints or lacquers ... pay
attention to their environmental compatibility .
GB │ IE
 15

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis