Atex Zertifikat; Eu-Type Examination Certificate - E+E Elektronik EE300Ex Bedienungsanleitung

8

ATEX Zertifikat

(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
Bedienungsanleitung EE300Ex Feuchte / Temperatur Sensor

EU-Type Examination Certificate

TRANSLATION
Equipment and Protective Systems Intended for Use in
Potentially Explosive Atmospheres – Directive 2014/34/EU
EU-Type Examination Certificate Number:
TPS 13 ATEX 38892 003 X
Equipment: Humidity / Temperature Sensor
Type: EE300Ex with connection cable HA011068
Manufacturer: E+E Elektronik GmbH
Address: Langwiesen 7
4209 ENGERWITZDORF
AUSTRIA
This equipment and any acceptable variation thereto are specified in the schedule to this certifi-
cate and the documents therein referred to.
TÜV SÜD Product Service GmbH, notified body No. 0123 in accordance with Article 17 of the
Council Directive 2014/34/EU of the European Parliament and of the Council dated 26 February
2014, certifies that this equipment has been found to comply with the Essential Health and Safety
Requirements relating to the design and construction of equipment and protective systems in-
tended for use in potentially explosive atmospheres, given in Annex II of the Directive.
The examination and test results are recorded in the confidential reports 713215990.
Compliance with the Essential Health and Safety Requirements has been assured by compliance
with:
EN IEC 60079-0:2018
EN 60079-11:2012
If the sign "X" is placed after the certificate number, it indicates that the equipment is subject to
special conditions for safe use specified in the schedule to this certificate.
This EU-Type Examination Certificate relates only to the design and the construction of the speci-
fied equipment in accordance with Directive 2014/34/EU. Further requirements of this Directive
apply to the manufacturer and supply of this equipment.
The marking of the equipment shall include the following:
Model without display:
Model with display:
II 1G Ex ia IIC T6...T1 Ga
Remote probe:
Certification body
Ridlerstrasse 65, 80339 Munich
digitally signed by U. Jacobs on 2021-08-04
.................................
Dipl.-Ing. Ulrich Jacobs
EU-Type Examination Certificate without signature shall not be valid. The certificates may be circulated only without
alteration. Extracts or alterations are subject to approval by TÜV SÜD Product Service GmbH.
The document is internally administrated under the following number: EX5A 038892 0010 Rev.01
TÜV SÜD Product Service GmbH • Zertifizierstelle • Ridlerstraße 65 • 80339 München • Deutschland
II 1G Ex ia IIC T4 Ga
II 2G Ex ia IIC T4 Gb
II 1D Ex ia IIIC T
In case of dispute, the German text shall prevail.
Issue 02
II 1D Ex ia IIIC T 80 °C Da
200
II 1G Ex ia IIB T4 Ga
80 °C...220 °C Da
200
Munich, 2021-08-04
Page 1 / 4
29