Scheppach hmc 3200 ci Original Anleitungen Seite 25

Documentation
In the case of short workpieces, pushing sticks or workpiece carriers have to be used. They have to be tuned to the
workpieces
For this work an auxiliary stopper has to be used. The auxiliary stopper can be self made and fixed with clamps or
something similar to the trimming stopper. See drawing no. 8..
Specified usage
The planing machine is constructed for the sole purpose of woodworking with the tools and accessories supplied.
The machine corresponds to the current EC machine guidelines.
The machine is designed for one-shift operation, operating time S 6 – 40 %.
Observe all safety and hazard notices on the machine.
Maintain all safety and hazard notices on the machine in a legible condition.
When used in an enclosed area, the machine must be connected to an exhaust system.
Use an exhaust system to remove wood shavings and sawdust. The flow rate at the suction nozzle must be 20 m/s. Partial
vacuum 1200 Pa.
The automatic turn-on device is available in the special accessories.
Model ALV 2 Item No. 79104010
Model ALV 10 Item No. 79104020
When the machine is switched on, the suction automatically runs after a 2-3 second delay. This prevents the mains fuse
from overloading.
When the working machine is switched off, the suction continues for a further 3-4 seconds and then switches off
automatically.
The remaining dust will thus be extracted, as stated in the hazardous materials ordinance. This saves electricity and reduces
noise. The exhaust system only runs when the work machine is in operation.
For industrial purposes, a dust extractor must be used for extraction.
Do not switch off or remove exhaust systems or dust extractors when the machine is running.
Only use the machine when it is in perfect condition, paying due attention to safety and possible hazards, in accordance
with the operating instructions. In particular, correct faults which could compromise safety as soon as possible!
The manufacturer's safety, working and maintenance regulations, along with the measurements given in the technical data,
must be observed.
Flexible exhaust lines have to be hardly inflammable.
The relevant accident prevention regulations and all other, generally recognised safety rules must be observed.
The machine may only be used, maintained and repaired by persons who are familiar with it and who have been trained
in the possible dangers. Unauthorised changes to the machine exclude the manufacturer from liability for any resultant
damages.
The machine may only be used with the manufacturer's original supplies and original tools.
Any other use apart from this is regarded is not specified and contravenes regulations. Any resulting damage is not the
liability of the manufacturer; the risk is carried by the user alone.
The safe function of protection devices has to be checked regularly before every start of work.
9322 0311
230 V/50 Hz
400 V/230 V/50 Hz
Page:25