WimTec Smart Betriebsanleitung Seite 19

SMART
Configuring the functions
Stagnation rinse:
DIP switch 4
Serves to rinse water supply lines in order to remove stagnant water that accumulates during
longer periods of disuse.
'ON' position:
Stagnation rinse is enabled.
'OFF' position:
Stagnation rinse function is disabled (default setting).
Time interval
Can be set from 3–48 h at the
interval control (see p. 14).
3–48 h
Stagnation rinse time:
DIP switch 5
You can select one of two predefined rinse times (10 s or 20 s).
'ON' position: Stagnation rinse time is set to 20 s.
'OFF' position: Stagnation rinse time is set to 10 s (default setting).
Automatic stagnation rinse
If the fitting has not been
used for the set period, a
stagnation rinse operation is
performed for the duration
(see DIP 5) configured.
Washbasin fitting
EN
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2 3 4 5 6
WimTec SMART
19