General Notes - WimTec Smart Betriebsanleitung

EN
SMART

General notes

The "General installation
terms and conditions"
provided at
www.wimtec.com apply.
12 Washbasin fitting
Congratulations on purchasing the WimTec SMART fitting.
In order to ensure that you will be able to enjoy this high-quality
product for many years, please take note of the following cleaning
and maintenance recommendations:
Use mild cleaning agents containing soap
Do not use abrasive, scrubbing, sealing or acidic
cleaning agents or disinfectants
Clean the fitting with a soft sponge or cloth only
Do not use steam cleaners
This manual is valid for the following products:
WimTec SMART washbasin fitting:
Art.No. 108 699, 108 705, 108 712, 108 729.
Delivery scope:
Tap housing with electronic module and 9 V battery or 230 V power
unit, magnetic valve, connnection hoses, dirt-filter attachment for
corner valve, mounting material and reflux preventers at variant with
mixer.
Important installation notes:
Mounting and installation may only be performed by a qualified
!
service provider in accordance with DIN 1988, ÖVE/ÖNORM E8001
and VDE 0100 Part 701. When planning and installing sanitary
facilities, all relevant local, national and inter-national standards
and provisions must be observed! Provide for 230 V / 12 V power
unit outside of the protected zone.
WimTec SMART