WimTec Smart Betriebsanleitung Seite 16

EN
SMART
Assembly
1
3b
OPEN - CLOSE
Luft- und wasserdichtes Gehäuse
Air- and water-tight housing
Air and water proof case
16 Washbasin fitting
2
4
1. Fasten the fitting to the washbasin.
2. When installing the mixed water version, use a return flow
valve with pre-filter or generally use an angle valve with
pre-filter.
3a.
Wall outlet version: Connect the power supply to the fitting –
open the water valve.
3b. Battery version: Place the battery into the battery module
and connect the battery to the fitting – open the water
valve.
4. Automatic range adjustment. The LED will start flashing 3
times after approx. 5 s, indicating that the fitting is opera-
tional. Do not trigger the sensor when performing the
range adjustment!
WimTec SMART
3a
!
ATTENTION!
Perform the following steps
in the order indicated!