Herunterladen Inhalt Inhalt Diese Seite drucken

Operating Instructions; Control Panel Features - Kaisai KPPH-09HRN29 Bedienungsanleitung

Mobile klimaanlage
Vorschau ausblenden Andere Handbücher für KPPH-09HRN29:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operating Instructions

Control Panel Features

NOTE: The following control panels
purchased may be slightly different according to the models. Your machine may not contain some indicators or
buttons. The actual shape shall prevail.
MODE button
Selects the appropriate operating mode. Each
time you press the button, a mode is selected in a
sequence that goes from COOL, FAN, DRY, HEAT
(on some models), and AUTO(on some models).
The mode indicator light illuminates under the
different mode setting.
NOTE: On above modes, the unit operates the auto
fan speed automatically.
Up (+) and Down (-) buttons
Used to adjust (increasing/decreasing) temperature
settings in 1°C/2°F(or 1°F) increments in a range of
17°C/62°F to 30°C/88°F (or 86°F).
NOTE: The control is capable of displaying
temperature in degrees Fahrenheit or degrees
Celsius. To convert from one to the other, press and
hold the Up and Down buttons at the same time for
3 seconds.
Power button
Power switch on/off.
are for explanation purpose only. The control panel of the unit you
Power
indicator light
Timer mode
indicator light
(set only by
remote controller)
59
Auto
Heat
Wireless
LED display
Shows the set temperature while on
cool,heat or auto mode. While on DRY
and FAN modes, it shows the room
temperature. Shows Error codes:
E0-EEPROM error.
E1-Room temperature sensor error.
E2-Evaporator temperature sensor error.
E3-Condenser temperature sensor error
(on some models).
E4-Display panel communication error.
EC-Refrigerant leakage detection
malfunction(on some models).
Shows protection code:
P1-Bottom tray is full--Connect the drain
hose and drain the collected water away.
If protection repeats,call for service.
NOTE: When one of the above malfunctions
occurs, turn off the unit, and check for any
obstructions. Restart the unit, if the
malfunction is still present, turn off the unit
and unplug the power cord. Contact the
manufacturer or its service agents or a
similar qualified person for service.
EN

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis