Yamaha YZ85LW Fahrer- Und Wartungshandbuch Seite 318

TRANSMISSION, SHIFT CAM AND SHIFT FORK
2. Install:
2nd wheel gear (32T) 1
6th wheel gear (25T) 2
3rd wheel gear (26T) 3
4th wheel gear (22T) 4
5th wheel gear (26T) 5
1st wheel gear (27T) 6
To drive axle 7.
NOTE:
5PA41880
Apply the molybdenum disulfide oil on the
1st, 2nd, 3rd and 4th wheel gears inner cir-
cumference and on the end surface.
Apply the transmission oil on the 5th and 6th
wheel gears inner circumference.
3. Install:
Washer 1
Circlip 2
NOTE:
Be sure the circlip sharp-edged corner a is
positioned opposite side to the washer and
gear b.
Be sure the circlip end c is positioned at
axle spline groove d.
5PA41890
5PA41900
4. Install:
Collar 1
NOTE:
Apply the lithium soap base grease on the oil
seal lip.
When installing the collar into the crankcase,
pay careful attention to the crankcase oil seal
lip.
5PA41910
4 - 62
ENG