Yamaha YZ85LW Fahrer- Und Wartungshandbuch Seite 282

WATER PUMP
2. Install:
Bearing 1
NOTE:
Install the bearing by pressing its outer race
parallel.
5PA41330
Impeller shaft
1. Install:
Impeller shaft 1
Washer 2
Impeller 3
NOTE:
Take care so that the oil seal lip is not dam-
aged or the spring does not slip off its posi-
tion.
5PA41340
When installing the impeller shaft, apply the
lithium soap base grease on the oil seal lip
and impeller shaft. And install the shaft while
turning it.
Hold the impeller shaft on its width across
the flats a with spanners, etc. and install the
impeller.
5PA41350
2. Install:
Gasket (water pump housing) 1
5PA41360
3. Install:
Water pump housing 1
Bolt (water pump housing) 2
Copper washer (coolant drain bolt)
3
Coolant drain bolt 4
5PA41370
4 - 44
ENG
14 Nm (1.4 m · kg, 10 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)
10 Nm (1.0 m · kg, 7.2 ft · lb)