Yamaha YZ85LW Fahrer- Und Wartungshandbuch Seite 270

KICK SHAFT, SHIFT SHAFT AND PRIMARY DRIVE GEAR
2. Install:
Spring guide 1
NOTE:
Slide the spring guide into the kick shaft, make
sure the groove a in the spring guide fits on
the stopper of the torsion spring.
5PA41120
3. Install:
Kick shaft assembly 1
NOTE:
Apply the transmission oil on the kick shaft.
Apply the lithium soap base grease on the
kick shaft stopper.
Slide the kick shaft assembly into the crank-
case, make sure the clip 2 and kick shaft
stopper a fit into their home positions b, c.
5PA41130
4. Hook:
Torsion spring 1
NOTE:
Turn the torsion spring clockwise and hook
into the proper hole a in the crankcase.
5PA41140
Kick idle gear
1. Install:
Washer 1
Kick idle gear 2
Circlip 3
NOTE:
Apply the transmission oil on the kick idle
gear inner circumference.
Install the kick idle gear with its groove a
5PA41150
facing the engine.
4 - 38
ENG