Belden Hirschmann EAGLE40-03 Referenzhandbuch Seite 586

3 8 .2 signa l-c ont a c t
Configure the signal contact interface settings.
3 8 .2 .1 signa l-c ont a c t link -a la rm
Configure the monitoring of the specific network ports.

Mode: Interface Range Mode

Privilege Level: Administrator

Format: signal-contact <P-1> link-alarm
Parameter Value
P-1 signal contact no.

no signa l-c ont a c t link -a la rm
Disable the option

Mode: Interface Range Mode

Privilege Level: Administrator

Format: no signal-contact <P-1> link-alarm
3 8 .3 show
Display device options and settings.
3 8 .3 .1 show signa l-c ont a c t
Display the signal contact settings.

Mode: Command is in all modes available.

Privilege Level: Guest

Format: show signal-contact <P-1> mode monitor state trap link-alarm events all
mode: Display the signal contact mode.
monitor: Display the signal contact monitor settings.
state: Display the signal contact state (open/close).
Note: This covers the signal contact`s administrative setting as well as its actual state.
trap: Display the signal contact trap information and settings.
link-alarm: Display the settings of the monitoring of the specific network ports.
events: Display the occurred device status events.
all: Display the signal contact settings for the specified signal contact.
Parameter Value
signal contact no.
P-1
RM CLI EAGLE40-03
Release 04.1 03/2021
Meaning
Meaning
139